ULTRA-HIGH RESOLUTION 
TIP/TILT STAGE


       

                                                       MODEL UHR12X12TT 12-inch x 12-inch Tip/Tilt Stage (Black Anodized finish)

                                                        Range: +/- 5 degrees
                                                        Resolution: 8.6 arc seconds (42 microradians) per rotation of actuator knob
                                                        Stainless steel actuators
                                                        Maximum recommended load: 100 pounds
                                                        Approximate weight: 21 pounds
                                                        Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                        Bottom plate: 16 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 4 on each side, ½-inch from the edge.

For further information please call Gordon Graham at (818) 700-1263


GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved.             Page last updated December 5, 2016