TILT/ROTATE STAGE
   Home
Heavy Duty Tip/Totate Stage (Load ~150 pounds)

    Custom Tilt/Rotate Stage 
          Blue Anodized Finish 

                                                      MODEL 6X6TR   6-inch x 6-inch Tilt /Rotate Stage (Black Anodized finish)

                                                        Range: +/- 5 degrees
                                                        Resolution: 35 arc minutes (10 milliradians) per rotation of actuator knob
                                                        Stainless steel actuators
                                                        Maximum recommended load: 25 pounds
                                                        Approximate weight: 11 pounds
                                                        Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                        Bottom plate: 8 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 2 on each side, ½-inch from the edge.

OTHER STAGES      Tip/tilt      Tip/Tilt/Rotate      5-Axis      Ultra-High Resolution

For further information please call Gordon Graham at (818) 700-1263


GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved.             Page last updated December 12, 2016