HOME

Heavy Duty Tip/Totate Stage (Load ~150 pounds)

    Custom Tilt/Rotate Stage 
          Blue Anodized Finish 

                                                       MODEL 20X20TR 20-inch x 20-inch Tilt /Rotate Stage (Black Anodized finish)

                                                        Range: +/- 5 degrees
                                                        Resolution:   4.8 arc minutes (2.6 milliradians) per rotation of actuator knob
                                                        Stainless steel actuators
                                                        Maximum recommended load: 150 pounds
                                                        Approximate weight: 81 pounds
                                                        Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                        Bottom plate: 16 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 4 on each side, ½-inch from the edge.

For further information please call Gordon Graham at (818) 700-1263

OTHER STAGES           Tip/Tilt   Tip/Tilt/Rotate   5-Axis   Ultra-High Resolution

For further information please call Gordon Graham at (818) 700-1263

GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved.             Page last updated December 18, 2016