HOME 


  Model 6X6TTR

                                                        MODEL 18X18TTR 18-inch x 18-inch Tip/Tilt/Rotate Stage (Black Anodized finish)

                                                        Range:   +/- 5 degrees
                                                        Resolution, Tip and Tilt:      3.6 arc minutes  (1.5 milliradians)  per rotation of actuator knob
                                                        Resolution, Rotate:               7.2 arc minutes (3.0 milliradians) per rotation of actuator knob
                                                        Stainless steel actuators
                                                        Maximum recommended load: 130 pounds
                                                        Approximate weight: 64 pounds
                                                        Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                        Bottom plate: 16 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 4 on each side, ½-inch from the edge.
 
 

OTHER STAGES  Tilt/Rotate   Tip/Tilt   5-Axis   Ultra-High Resolution

For further information please call Gordon Graham at (818) 700-1263

GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved             Page last updated December 18, 2016