HOME


 
 
 
 
 

           Model 12X12TT

                                                      MODEL 18x18TT 18-inch x 18-inch Tip/Tilt Stage (Black Anodized finish)

                                                        Range: +/- 5 degrees
                                                        Resolution: 3.6 arc minutes (1.5 milliradians) per rotation of actuator knob
                                                        Stainless steel actuators
                                                        Maximum recommended load: 130 pounds
                                                        Approximate weight: 44 pounds
                                                        Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                        Bottom plate: 16 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 4 on each side, ½-inch from the edge.
 

OTHER STAGES  Tilt/Rotate   Tip/Tilt/Rotate   5-Axis   Ultra-High Resolution

For further information please call Gordon Graham at (818) 700-1263

GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved.           Page last updated December 18, 2016