Home


 
 
 
 
 
 

        Model 12X12TT

                                                         MODEL 16x16TT 16-inch x 16-inch Tip/Tilt Stage (Black Anodized finish)

                                                         Range: +/- 5 degrees
                                                         Resolution: 5.8 arc minutes (1.7 milliradians) per rotation of actuator knob
                                                         Stainless steel actuators
                                                         Maximum recommended load: 120 pounds
                                                         Approximate weight: 33 pounds
                                                         Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                         Bottom plate: 16 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 4 on each side, ½-inch from the edge.
 

OTHER STAGES  Tilt/Rotate   Tip/Tilt/Rotate   5-Axis   Ultra-High Resolution

For further information please call Gordon Graham at (818) 700-1263

GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved.             Page last updated December 18, 2016