Model 6X6TTR

                                                       MODEL 12X12TTR  12-inch x 12-inch Tip/Tilt/Rotate Stage (Black Anodized finish)

                                                         Range:   +/- 5 degrees
                                                         Resolution, Tip and Tilt:      7.5 arc minutes  (2.3 milliradians)  per rotation of actuator knob
                                                         Resolution, Rotate:              15.8 arc minutes (4.6 milliradians) per rotation of actuator knob
                                                         Stainless steel actuators
                                                         Maximum recommended load: 100 pounds
                                                         Approximate weight: 30 pounds
                                                         Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                         Bottom plate: 16 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 4 on each side, ½-inch from the edge.

OTHER STAGES  Tilt/Rotate   Tip/Tilt   5-Axis   Ultra-High Resolution

For further information please call Gordon Graham at (818) 700-1263

GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved  Page last updated December 18, 2016