Home


 
 
 
 
 

              Model 12X12TT

                                                         MODEL 12X12TT 12-inch x 12-inch Tip/Tilt Stage (Black Anodized finish)

                                                          Range: +/- 5 degrees
                                                          Resolution: 7.9 arc minutes (2.3 milliradians) per rotation of actuator knob
                                                          Stainless steel actuators
                                                          Maximum recommended load: 100 pounds
                                                          Approximate weight: 19 pounds
                                                          Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                          Bottom plate: 12 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 3 on each side, ½-inch from the edge.

OTHER STAGES  Tilt/Rotate   Tip/Tilt/Rotate   5-Axis   Ultra-High Resolution

For further information please call Gordon Graham at (818) 700-1263

GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved.             Page last updated December 18, 2016