Home


  Model 6X6TTR

                                                         MODEL 10X10TTR   10-inch x 10-inch Tip/Tilt/Rotate Stage (Black Anodized finish)

                                                           Range:   +/- 5 degrees
                                                           Resolution, Tip and Tilt:      9.7 arc minutes  (2.8 milliradians)  per rotation of actuator knob
                                                           Resolution, Rotate:              19.4 arc minutes (5.9 milliradians) per rotation of actuator knob
                                                           Stainless steel actuators
                                                           Maximum recommended load: 75 pounds
                                                           Approximate weight: 22 pounds
                                                           Top Plate: ¼-20 tapped holes on 1.0 inch centers
                                                           Bottom plate: 12 C’bored holes to accommodate ¼-inch Socket Head Cap Screws, 3 on each side, ½-inch from the edge.
 
 

OTHER STAGES  Tilt/Rotate   Tip/Tilt   5-Axis   Ultra-High Resolution

For further information please call Gordon Graham at (818) 700-1263

GRAHAM OPTICAL SYSTEMS  9530 Topanga Canyon Blvd., Chatsworth, California 91311
Phone (818) 700-1263      e-mail: techinfo@grahamoptical.com

Copyright © 2016  Graham Optical Systems.  All Rights Reserved             Page last updated December 18, 2016